Руководство по строительству

Версия от 04:19, 21 февраля 2014; imported>Kingofkosmos (Made more things into tables.)
Pen.pngНуждается в пересмотре!Pen.png
Эта страница устарела и/или нуждается в пересмотре. Если руководство нуждается в пересмотре, вот тут пример.
Причина: "Needs info added to where it says NEEDS INFO. And a few pics."
NPA.png This article needs some kind of picture. You can help by uploading something fitting. NPA.png

If you want to do a job, like Station Engineer, you need to know how to build and deconstruct stuff.

Basic Tools FLOORIT TAULUIHIN JA CHAIRS/TABLES USES VEKS

Before you can begin any construction or deconstruction you need to gather a few useful tools.

These tools can be found in any blue Mechanical Toolbox on the station. They can also be made in an Autolathe or dispensed from a YouTool -vending machine.

Crowbar
Screwdriver
Welder
Wirecutters
Wrench


Materials

To build anything, you need materials.


Metal

Metal
Metal
Местонахождение: Ready stacks in Engineering, Auxiliary Tool Storage, E.V.A., Robotics and Atmospherics.
Shaft Miners have the ability to smelt more from iron ore and Cargo can order more.
Используется для: Constructing various things from supportive elements to decorations
Стратегия: Hold in active hand and activate to start building
Описание
List of things you can make with having Metal in your hand and activating it:

Things you can do with it in your hand:

  • Finish wall girders into walls.
  • Repair broken walls.
  • Add armor to turret frames.
  • Refill an Exosuit Fabricator, Autolathe or Protolathe.

How to produce Metal:

Smelt iron ore at the Mining furnace.


Glass and Reinforced Glass

Glass and Reinforced Glass
Glass and Reinforced Glass
Местонахождение: Stacks exist in Engineering, Auxiliary Tool Storage, E.V.A., Atmospherics and Robotics.
Shaft Miners have the ability to smelt more from sand and Cargo can order more.
Используется для: Constructing windows and other things
Стратегия: Hold in active hand and activate to start building
Описание
Here's the list of things you can make with having glass/reinforced glass in your hand:

How to produce Glass:

Smelt sand at the Mining furnace, or smelt Glass shards with a Welding Tool to reform them into Glass sheets.

How to produce Reinforced Glass:

Use rods on glass


Plasteel (Reinforced Metal)

Plasteel/Reinforced Metal
Plasteel/Reinforced Metal
Местонахождение: A stack exists in Engineering, E.V.A. and Robotics.
Shaft Miners have the ability to smelt more with iron and plasma ores.
Используется для: Reinforcing walls, mechs, building an AI Core
Стратегия: Hold in active hand and activate to start building
Описание
Plasteel is an alloy of plasma and iron.

List of things you can make having plasteel in your hand and activating it:

How to produce Plasteel:

Smelt a combination of iron ore and plasma ore at the Mining furnace.


Rods

Rods
Rods
Местонахождение: Stacks exist in Engineering, Auxiliary Tool Storage, E.V.A..
More can be made from Metal sheets.
Используется для: Constructing grilles and reinforcing
Стратегия: Hold in active hand and use it on things
Описание
Here's the list of things you can make with having rods in your active hand:
  • Grille (by clicking in your hand).
  • Lattice (for floors, by clicking on a space tile).
  • Reinforcing tables.
  • Reinforcing plating (by clicking on the plating).
  • Reinforcing normal glass into reinforced glass (have rods in hand while clicking glass sheet).
  • Can be turned back into metal sheets by being welded with a Welding Tool.

How to produce Rods:

Use metal and click "2x metal rods" (makes two sets of rods)


Floor Tiles

Floor Tiles
Floor Tiles
Местонахождение: Ready stacks can be found nowhere, can be made from metal or removed from the floor with a crowbar
Используется для: Constructing Plating or Steel Floor
Стратегия: Hold in active hand and use it on lattices or a floor without plating
Описание
A surprisingly effective ranged weapon.

How to produce Floor Tiles:

Use metal and click "4x floor tiles" (makes 4 floor tiles)


Planks

Planks
Planks
Местонахождение: Ready stacks can be found nowhere, can be made from deconstructing tables.
Используется для: Constructing various wooden things
Стратегия: Hold in active hand and activate it to start constructing
Описание
List of things you get when activated in hand:

How to produce Planks:

Grow Tower Caps and cut them up with a hatchet, or deconstruct already existing wooden tables in the Vacant Office.


Constructions

Lattice

The basic base for all types of construction, this is placed directly in space.

Object Requires to build How to build
Lattice Lattice Rodsx1
  1. Have rods in your hand.
  2. Click on a empty space tile.
How to deconstruct
Tools
  1. Use a Welder to cut the lattice into one rod.

Welder


Plating

The basic floor which you put things like wires and pipes upon. 'All' floors and walls are built on top of this.

Object Requires to build How to build
Plating Plating Floor tilex1
  1. Have the floor tile in your hand.
  2. Click on a lattice.
How to deconstruct
Tools
  1. Use a Crowbar on broken plating, otherwise it does not deconstruct.

Crowbar


Steel Floor

This is the basic "nice" floor, this floor should be considered used in all public areas, hence why there's none of these in maintenance tunnels.

Object Requires to build How to build
Steel Floor Steel Floor Floor tilex1
  1. Have the floor tile in your hand.
  2. Click on a Plating-tile.
How to deconstruct
Tools
  1. Use a Crowbar on a floor tile to remove it.

Crowbar


Wood Floor

This is a fancy floor, used in the library and similar places.

Object Requires to build How to build
Wood Floor Wood Floor Wood tilex1
  1. Make four Wood Tiles out of a plank of wood.
  2. Have the Wood Tile in your hand.
  3. Click on a Plating-tile.
How to deconstruct
Tools
  • If you want the wooden tile back, dismantle the floor with a Screwdriver, or...
  • Destroy it with a Crowbar.

Crowbar or
Screwdriver


Reinforced Floor

This is a reinforced floor, used in science and similar areas for better protection against fire or explosions.

Object Requires to build How to build
Reinforced Floor Reinforced Floor Rodsx2
  1. Have two rods in your hand.
  2. Click on a Plating-tile.
How to deconstruct
Tools
  1. Use a Wrench to dismantle it to two rods.

Wrench


Carpeted Floor

This is a carpeted floor, used to make your office look fancy.

Object Requires to build How to build
Carpeted Floor Carpeted Floor Carpetx1
  1. Have the carpet tile in your hand.
  2. Click on a Plating-tile.
How to deconstruct
Tools
  1. Use a crowbar to pick up the carpet tile.

Crowbar


Light Floor

A fancy, futuristic, floor that lights up its surroundings!

Object Requires to build How to build
LightFloor.gif Light Floor Glassx1
Metalx1
Wire Coilx5

Assuming there already is a plating:

  1. Use the wire on glass.
  2. Use the metal on the tile you get.
  3. Place the light tile on the plating.
How to deconstruct
Tools
  1. Use a Crowbar on the light tile to remove the metal.
  2. Use Wirecutters on the resulting tile to separate wires from glass.

Crowbar
Wirecutters


Walls

Normal Wall

This is the standard type of wall found around the station, they are easy to construct and remove but are not as strong as reinforced walls. They also come in a hidden door variety. They're useful for:

  • Keeping people out.
  • Keeping people in.
  • Keeping people from going places.
Object Requires to build How to build
so bland Wall Metalx4
  1. Stand where you want the wall.
  2. Click the metal in your hand to open the construction panel.
  3. Choose 'Build wall girders' from the list.
  4. Use the remaining 2 sheets of metal on the girder.
How to deconstruct
Tools
  1. Weld off the plating.
  2. Wrench the girders apart (or alternately, you can use a Crowbar to dislodge the girder and drag it out of the way).

Welder
Wrench
(Crowbar)


Reinforced Wall

This is the reinforced type of wall found in secure areas of station, they are reasonably simple to construct, but are very time consuming to remove. They also can be made as a hidden door. They're useful for:

  • Keeping people in and out of high security areas.
Object Requires to build How to build
such reinforce Reinforced Wall Metalx2 Plasteelx2
  1. Stand where you want the reinforced wall.
  2. Click the metal in your hand to open the construction panel.
  3. Choose 'Build wall girders' form the list.
  4. Use the plasteel on the girders to reinforce them.
  5. Use the last plasteel sheet on the reinforced girders to finish the wall.
How to deconstruct
Tools
  1. Wirecutters.
  2. Screwdriver.
  3. Welder.
  4. Crowbar.
  5. Wrench.
  6. Welder.
  7. Crowbar.
  8. Screwdriver.
  9. Wirecutters.
  10. Wrench.

Welder
Wrench
Screwdriver
Wirecutters
Crowbar


Normal/Reinforced Hidden Door

Also known as "Fake Walls" or "Hidden Walls". With a little imagination, hidden doors can be used in many marvelous tactics, varying from ambushes to passages into your very own secret hideaway room.

  • Click to open.
  • An almost undetectable escape route.
  • Not airtight, leaks gases through.
  • Otherwise, same as a regular wall.
Object Requires to build How to build
False Wall.gif Hidden Door
False Wall r.gif Reinforced Hidden Door 		Metalx4 or
Metalx2 Plasteelx2
  1. Stand where you want the door.
  2. Click the metal in your hand to open the construction panel.
  3. Choose 'Build wall girder' from the list.
  4. Use crowbar on the girder and wait a few seconds for it to dislodge.
  5. Use the remaining 2 sheets of metal, or plasteel for a reinforced type, on the girder.

To turn an already finished wall into a hidden door, follow the deconstruction guide for the wall type until the final wrenching of the girder, and instead proceed from the "Use crowbar on the girder" line above.

How to deconstruct
Tools
  1. Screwdriver.
  2. Welder.
  3. Wrench.

Screwdriver
Welder
Wrench


Normal/Reinforced Windows

Windows are aesthetically quite pleasing because they are almost invisible. You can build two types of windows:

  • Full: A see-through wall. Usually only used if you don't have enough for 2-4 one-directionals or the metal for a wall.

  • One Direction: Stops movement only from the way it faces.
Object Requires to build How to build
One Directional Glass Full Glass Wall Windows
One Directional Reinforced Glass Full Reinforced Glass Wall Reinforced Windows 		Glassx2 or
Reinforced Glassx2
  1. Click the glass/reinforced glass in hand.
  2. Select Full or One Direction from the menu.
  3. Drag where you want it.
  4. Right-click to rotate to the direction you want if one-directional.
  5. Screwdriver it in place.
  6. Continue if reinforced glass:
  7. Crowbar (Pop pane in).
  8. Screwdriver (Secure pane).
How to deconstruct
Tools
  1. Screwdriver to unscrew the window from the floor.
  2. If normal glass: Wrench to deconstruct the window.
  3. If reinforced glass: Crowbar to pop the glass out.
  4. Screwdriver to unscrew the frame from the floor.
  5. Wrench to deconstruct the window.

Hitting the pane repeatedly with a weapon will smash it into a glass shard or, if reinforced glass, a glass shard and a metal rod.

Screwdriver
Wrench
Crowbar


Wall Mountings

APC

Info about Area Power Controllers can be found here.

Object Requires to build How to build
Area Power Controller APC Metalx2
Cable Coilx1
Circuitboard Power Control Module x1
Screwdriver
Power Cellx1
Crowbar
Authorized IDx1
  1. Use the metal and make an APC frame.
  2. Use the frame on the wall you want the APC on (may only be placed in areas which have been defined as a Station Area using the Chief Engineer's Station Blueprints).
  3. Fit it with the cable coil.
  4. Fit it with the Power Control Module.
  5. Screwdriver the electronics into place.
  6. Add the power cell.
  7. Crowbar shut. It starts ID locked, with the cover engaged and the main switch turned off.
How to deconstruct
Tools
  1. Swipe Card to unlock APC. Alternatively, if the APC is broken (tilted and cracked cover), try using a fire extinguisher to smash off the cover, allowing access to the battery.
  2. Remove power cell by hand.
  3. Screwdriver to unsecure electronics.
  4. Crowbar to lift floor tile in front of APC
  5. Wirecutters to remove cables.
  6. Crowbar to remove Power Control Board.
  7. Welder to remover from wall.
  8. Wrenching the frame, that is now detached from the wall, deconstructs it to two metal sheets.

Screwdriver
Wirecutters
Crowbar
Welder
Authorized ID


Air Alarm

Info about Air Alarms can be found here.

Object Requires to build How to build
Air Alarm Air Alarm Metalx2
Cable Coilx1
Circuitboard Air Alarm Electronics x1
Screwdriver
  1. Use the metal and make an Air Alarm frame.
  2. Use the frame on the wall you want it on.
  3. Put in the Air Alarm Electronics.
  4. Wire it with 5 cable pieces.
  5. Screwdriver to close.
How to deconstruct
Tools
  1. Open cover with screwdriver.
  2. Cut all the wires using wirecutters.
  3. Cut the remaining wires with wirecutters.
  4. Pry out the circuit using the crowbar.
  5. Remove the frame from the wall using the wrench.

Screwdriver
Wirecutters
Crowbar
Wrench


Fire Alarm

Info about Fire Alarms can be found here.

Object Requires to build How to build
Fire Alarm Fire Alarm Metalx2
Cable Coilx1
Circuitboard Fire Alarm Electronics x1
Screwdriver
  1. Use the metal and make an Fire Alarm frame.
  2. Use the frame on the wall you want it on.
  3. Put in the Fire Alarm Electronics.
  4. Wire it with 5 cable pieces.
  5. Screwdriver to close.
How to deconstruct
Tools
  1. Open cover with screwdriver.
  2. Cut all the wires using wirecutters.
  3. Pry out the circuit using the crowbar.
  4. Remove the frame from the wall using the wrench.

Screwdriver
Wirecutters
Crowbar
Wrench


Other

Grille

Grilles are usually used in combination with directional windows. They allow gases and energy rounds to pass through them, but stop other objects. They can also be electrified for high security areas by building them on top of a live power wire.

  • Keeping people in or out.
  • Securing an area with electrified grilles.
Object Requires to build How to build
Grille Grille Rodsx2
  1. Stand where you would like the grille to be placed.
  2. Click on the stack of 2 rods with the hand you have them in.
How to deconstruct
Tools
  • Use Wirecutters to neatly cut the grille, or
  • ...Use a Screwdriver to unfasten and drag it away, or
  • ...Kick/smash it down.

Wirecutters or
Screwdriver


Window-door (Windoor)

Like a door, but more minimalistic.

Object Requires to build How to build
Windoor Window-door Reinforced glassx5
Reinforced metalx2
Wire coilx1
Wrench
Screwdriver
Crowbar
Circuitboard Airlock Electronics x1
  1. Click the reinforced glass pane.
  2. Click the "Windoor" button.
  3. Wrench.
  4. Plasteel (Optional: To create a secure windoor).
  5. Cable.
  6. Airlock Electronics.
  7. Crowbar.
How to deconstruct
Tools

INFO NEEDED

INFO NEEDED


Airlock (Door)

This is an airlock - it locks air. Everyone just calls them doors.

Object Requires to build How to build
Airlock.gif Airlock Metalx4
Wire coilx1
Wrench
Screwdriver
Airlock ElectronicsAirlock Electronics x1
IDx1
OPTIONAL: Reinforced glassx1
Penx1
  1. Metal Use the metal and make an Airlock Assembly.
  2. Wrench Wrench it in place.
  3. Pen (OPTIONAL) Use pen to name the Airlock.
  4. Reinforced glass (OPTIONAL) Add reinforced glass to make a glass airlock.
  5. Wire coil Add wires.
  6. ID Airlock electronics Unlock the airlock electronic board with an ID.
  7. Airlock electronics Use the airlock electronic board and set the access level.
  8. Airlock electronics Add the airlock electronic board to the airlock frame.
  9. Screwdriver Screwdriver to finish.
How to deconstruct
Tools

Cannot be done to an emagged airlock! RCD deconstruction must be used for that. It is possible to build a new airlock over the emagged one.

  1. Screwdriver the door.
  2. Use Multitool and Wirecutters to disable everything except the doorbolts as detailed here.

(Doorbolts must be up for this to work!)

  1. Weld the door shut.
  2. Crowbar the electronics out (if the door is electrified, this won't work for some reason).
  3. Wirecut the wires out.
  4. Unsecure it with a Wrench.
  5. Weld it to deconstruct to metal plates.

Welder
Wrench
Screwdriver
Wirecutters
Crowbar
Multitool


Security Camera

Electric eyes of the AI or for camera monitors to look through.

Camera upgrades:

  • Solid Plasma for EMP-proofing.
  • Carrot for x-ray.
  • Proximity Sensor for motion alarm.
Object Requires to build How to build
Security Camera.gif Security Camera Metalx5
Cable Piecesx1
Wrench
Welder
Screwdriver
  1. Use the metal and make a Camera Assembly.
  2. Place the camera assembly on the tile where'd you like the camera to be.
  3. Wrench it into position.
  4. Weld it to the wall.
  5. OPTIONAL: Add any additional upgrades (plasma, carrot or prox sensor).
  6. Add wire.
  7. Screwdriver the camera to complete it.
  8. Set camera network (default is SS13).
  9. Set camera direction.
How to deconstruct
Tools
  1. Screwdriver Screwdriver the camera to open the back panel.
  2. Wirecutters Use your Wirecutter to cut all the wires (cutting the alarm wire is optional).
  3. Welder Use your Welder to unweld the camera from the wall.
  4. Wrench Wrench the camera to unattach it from the wall.
  5. Crowbar Crowbar the camera assembly to remove any upgrades.

Crowbar
Screwdriver
Welder
Wirecutters
Wrench


Turret

To ensure no one trespasses an area, can also be set to different modes. NEEDS INFO ABOUT DIFFERENT MODES AND SUCH

Object Requires to build How to build
Turret Turret Metalx7
Wrench
Screwdriver
Welder
Any energy-based gun Any energy-based gun x1
Proximity Sensorx1
  1. Build a turret frame from metal.
  2. Use a wrench to secure the turret frame(it can be moved around before being secured).
  3. Use metal on the turret frame to build the cover.
  4. Use a wrench on the frame to bolt the cover.
  5. Add the gun.
  6. Add the prox sensor.
  7. Use a screwdriver to secure it all.
  8. Use more metal on the frame.
  9. Finally use a welder to secure the second layer of metal.
How to deconstruct
Tools

NEEDS INFO

NEEDS INFO


AI Core

The AI's house.

Object Requires to build How to build
AI.gif AI Core Reinforced metalx4
Reinforced Glassx2
Wire Coilx1
Wrench
Screwdriver
AI Circuitboardx1
Optional:
Human brainx1
  1. AI Core building phase 1Build AI Core Frame from 4 reinforced sheets.
  2. Wrench into place.
  3. AI Core building phase 2Add Circuit board.
  4. AI Core building phase 3Screwdriver.
  5. AI Core building phase 4Add wires.
  6. AI Core building phase 5Add brain placed in an MMI (only if you want a NEW AI).
  7. AI Core building phase 6Add reinforced glass.
  8. Screwdriver.
How to deconstruct
Tools

NEEDS INFO

NEEDS INFO


Solar Panels and Trackers

You can generate power with things.

Object Requires to build How to build
Solar Panel
Solar Panel
Solar Tracker
Solar Tracker 		Solar Assemblyx1
Wrench
Glassx2 or
Reinforced Glassx2
Tracker:
Tracker Electronicsx1
  1. Solar Assembly Place the solar assembly on where you want to construct your solar panel/tracker. To connect it to a wire you must construct it under a wire node.
  2. Wrench Wrench the solar assembly into place.
  3. Tracker Electronics (OPTIONAL) Add the electronics if you want to create a solar tracker.
  4. Glass or Reinforced Glass Finish the construction by placing glass, or reinforced glass, into the assembly frame.
How to deconstruct
Tools
  1. Take out the panel with a Crowbar.
  2. If you are deconstructing a tracker: Take out the electronics with your Crowbar.
  3. Wrench the leftover assembly from it's place and you will be able to move it.

Crowbar
Wrench


Computers

Computers can have various uses.

Object Requires to build How to build
Some computer] Computer Metalx5
Glassx2
Cable piecesx5
Wrench
Screwdriver
Circuitboardx1
  1. Use the metal and make a Computer Frame.
  2. Wrench it inplace.
  3. Insert the Circuitboard of your selection.
  4. Screwdriver.
  5. Wires.
  6. Glass.
  7. Screwdriver to finish.
How to deconstruct
Tools
  1. Screwdriver to detach the screen.
  2. Crowbar to pry off the screen.
  3. Wirecutters to cut the cables.
  4. Screwdriver to detach the circuit lid.
  5. Crowbar to pry out the circuitboard.
  6. Wrench to detach the frame.
  7. Welder to disassemble the frame.

Welder
Wrench
Screwdriver
Wirecutters
Crowbar


Autolathe.png Machines

Their construction is detailed in the machine construction guide.

Machine deconstruction:

Requires
Screwdriver, Crowbar, Wirecutters, Wrench
  1. Screwdriver to open the cover.
  2. Crowbar to pry out the circuit.
  3. Wirecutters to remove the wires.
  4. Wrench to disassemble the frame.

Usually returns all or most components used in construction. Some components may become broken.


Файл:Lightfixture.png Light Fixture

Provides light for the people. Bulb fixture is much dimmer than the tube-one.

Requires
2 x Metal, 1x Wire Coil, 1x Light Tube or Light Bulb Light Tube/Bulb,Screwdriver
  1. Build frame from 2 metal sheets (or 1 metal sheet for small fixtures).
  2. Place frame on wall.
  3. Add wires.
  4. Screwdriver.
  5. Add light tube (or light bulb for small fixtures).

Light Fixture deconstruction:

INFO NEEDED


Recharge Station

INFO NEEDED HOW TO CONSTRUCT ONE. OR SHOULD THIS BE IN THE MACHINES-PAGE?

Recharge Station deconstruction:

Requires
Screwdriver, Crowbar, Wirecutters, Wrench, Authorized ID 
 Unlock the charger with an ID.
 Screwdriver to open the cover.
 Wrench to dislodge the internal plating.
 Wirecutters to remove the wires.
 Crowbar to remove the components.

Usually returns all or most components used in construction. Some components may become broken.


Disposal Pipe Disposal Bin Disposal Outlet Disposal Pipes and Machinery

Requires
1 x Disposal Pipe or Disposal Bin or Disposal Outlet Disposal Pipe/Machine, Welder, Wrench, Crowbar
  1. Retrieve the pipe/machine from the Disposal Pipe Dispenser (found in Atmosia).
  2. Crowbar the floor tile, if exists, to access plating.
  3. Move pipe over plating, rotate and flip using the right-click menu.
  4. Wrench pipe.
  5. Weld pipe.

Disposal Pipe deconstruction:

Requires
Welder, Wrench 
 Welder on pipe to remove its joints.
 Wrench to detach it from the plating.

Note: You can then click and drag the pipe segment onto the Disposal Pipe Dispenser to delete it.

Disposal Machinery deconstruction:

Requires
Screwdriver, Welder, Wrench 
 If Disposal Bin, turn off the pump.
 Screwdriver to remove power connection.
 Welder on machine to remove its joints.
 Wrench to detach it from the plating.


Robot Cyborg Mech Robots, Cyborgs and Mechs

Their construction is described at: Robots, Cyborgs and Mechs -pages.


Furniture

Chairs

Chairs are for sitting down and making the place look nice. The only real use for chairs are to restrain people, building electric chairs or to buckle in when the shuttle is about to take off. Office chairs can also be used to move buckled people around.

Object Requires to build How to build
Chair Stool Comfy Chair Office Chair Chair/Stool/Comfy Chair/Office Chair Metalx1
  1. Stand where you want the chair.
  2. Pick up some metal.
  3. Click the metal in hand.
  4. Select chair from menu.
How to deconstruct
Tools
  1. Wrench a chair to transform it back into a metal sheet.

Wrench


Tables/Reinforced Table

Tables are used to hold objects on. Put your stuff on it, but don't put your feet on it. The most common ones are standard metal one and reinforced. Tables can also be used for ghetto surgery.

Object Requires to build How to build
Table
Table
Reinforced Table
Reinforced Table
Wooden Table
Wooden Table 		Metalx2
or
Planksx2
or
Metalx2
Rodsx2
  1. Pick up some metal (or planks).
  2. Activate it in hand.
  3. Select table parts from menu.
  4. (If you want a Reinforced Table: Use rods on the table parts).
  5. Stand on the tile where you want the table.
  6. Activate the table parts in hand.
How to deconstruct
Tools
  1. (If a Reinforced Table: Welder first to weaken the table.)
  2. Wrench to disassemble it.

(Welder)
Wrench


Lockers

Locker
Locker
Местонахождение: Nearly everywhere
Используется для: Storing everything but the biggest things
Стратегия: Open, fill with stuff, close, lock
Описание
Lockers are among the most common and arguably the most useful of containers on the station. Nearly anything can fit inside, barring other lockers, crates, and certain especially large objects like racks and MULEbots.

Besides being welded shut, some lockers can be, well, locked. Several levels of access exist, such as security-, captain-, and private-level access. These can be opened with the proper level identification card, emag item, or a few good laser blasts.

If you yourself are inside a locker, you can see your surroundings. Normally you can move in any direction to exit the locker, but if the locker is locked or welded, you will be unable to exit and you cannot unweld or unlock your cell from inside - at that point if you try to move around you will instead throw yourself against the sides of the locker, making a BANG BANG sound that can be heard from several squares away. Using the Resist button will allow you to slowly open the locker.

Coffins count as lockers.

Emergency LockerJumpsuit LockerMedical LockerL2 LockerL3 LockerL4 LockerCoffin

Locker deconstruction:

Requires
Welder 
 Open the locker.
 Weld the locker with a Welder to disassemble it into metal.

Rack

Rack
Rack
Местонахождение: Armory, Engineering, Atmospherics, E.V.A., Mining Outpost and a few other places
Используется для: Used for equipment storage in the station
Стратегия: Place things on it for show
Описание
Racks can be made with a single sheet of metal. They are flat and wide, incapable of being walked over, and is bolted together. It can hold any number of items, but it holds them stacked on top of each other like a table. They are most common in maintenance tunnels and the EVA room.

Rack deconstruction:

Requires
NEEDS INFO ADDED 
NEEDS INFO ADDED

Beds

Bed
Bed
Местонахождение: Dormitory, Prison Wing, Brig, Medbay, Mining Outpost and a few other places
Используется для: Sleeping on or buckling people to stay in place
Стратегия: Go on top of it and *sleep. To buckle someone, put them on the bed and drag their sprite on it, to release click on the bed
Описание
Get your mind out of the gutter, they're for sleeping! Most station's beds come with a bedsheet, and new beds without sheets can be made with metal. The Medbay's preferred variation of a bed is the movable Roller Bed Roller Bed, which is very useful for erping transporting patients.

Bed deconstruction:

Requires
NEEDS INFO ADDED 
NEEDS INFO ADDED

Bookcase.png Bookcase

Holds any number of books inside.

Requires
5 x Planks, Wrench,

Construct a frame with 4 wooden planks.

Wrench the frame into place.

Add a plank to the frame to make a shelf.

Bookcase deconstruction:

Requires
Crowbar
Wrench 
 Crowbar out the shelf.
 Unsecure the frame with a Wrench.
 Break apart the frame with a Crowbar.


Power Wires

You cannot construct wires. They are only available from yellow toolboxes, engineering vending machines or finding the ones scattered about the station's construction- and storage-areas.

  • All wires are electrified if connected to a power net (a charged SMES battery is attached to the wire), and you will get fried if you touch them.
  • Insulated gloves negate any electrical shocks to the player.

Let's say you have the following situation to fix:

How Do I Wire?

Wires are directionally dependent on where you set them down, and will apply adjacently to each "tile" you are standing by. Wires will always face inwards to you, sort of like this:

u see her lik dis

This image was made by standing in the center tile with a wire coil in hand and clicking on all 8 surrounding tiles.

In situations where you can't place a wire like this you have an alternative way. Just stand on a tile, face the direction you want it to go (ctrl+arrow key) and click the tile you're standing on.

is so easy

This image was made by standing on the tile, pressing ctrl + left arrow key and then clicking the tile. The cable coil was in my active hand.

If you ever make a mistake with a wire, use the wirecutters to trim them! Simple as that. Wear insulated gloves if you value your life.

Knot Wiring

Let's say you have a situation that you need to fix:

oh shit man how

The easiest method of wiring is knot-wiring. Also known as unsmooth or non-smooth wiring.

Fixing this is simple:

yes -> yes yes -> wow. Done.

You just position yourself properly and click the tile to lay down wire. Make sure you click on the plating (floor) and not the already laid wire. This is because:

yes + wait waht = o god wow

This might look about the same as in the previous image, however it's not. In the previous image your ending result had three pieces of wire, one going from the east to the center, one going from the north to the center and one going from the west to the center. In this situation you have two pieces of wire. One going east to west and one going north to center. The two wires don't meet in the center, because the horizontal wire is going east-west without it having a point (or knot) in the center.

Smooth Wiring

Just click on wires that are "knotted" at on end (you just need to click on the wire, not the little knotted dot). Smooth wires do not power other wires on their same tile. So make sure to apply to the source wire, or the connective tip.

To fix this situation with smooth wire you'll have to follow the steps:

ok simple -> so precision -> such smooth -> wow. Done.

In this method you first lay one cable to go from one of the directions to the center (image 1). You then position yourself in another direction and click on the already laid wire piece (and not the floor!). This will make the already placed piece and the new piece combine into one smooth piece of wire (image 2). You then place another piece to go from the last remaining direction to the center (image 3) and click it from the last direction to make a 2nd smooth piece of wire (image 4).

This method often uses up more wire than dot-wiring, but it's prettier and usually preferred.

Wire-net Reset

This is Byond's attempt to "reset" the whole power net in order to deal with new/removed wires that shift the power value of a whole system. It will cause APCs to stop charging for a moment, and in huge nets it can shut down the charging of all APCs for a while.

Don't mess with wires unless you have to, it causes problems to everyone in both OOC (potential lag) and IC (power loss).


Pipes

Pipes are only constructed from Pipe Dispensers in Atmospherics. To use a Pipe Dispenser, follow these steps:

  1. Put Dispenser in a powered area.
  2. Wrench Dispenser to lock it into place.
  3. Click on the Pipe Dispenser with an empty hand and select the pipes you wish to use.
  4. You have a pipe to play with now.
  5. Wrench Dispenser to make it mobile once more.

Placing and Removing Pipes

Disposal pipe.png Disposal Pipes

  1. Rotate the pipe to the direction you wish the pipe to be in.
  2. Wrench the pipe to the ground.
  3. Use a lit welder to fuse the pipe to the ground.

Gaspipe.png Gas Pipes

  1. Rotate the pipe to the direction you wish (pay attention to gas pumps as they are direction dependent).
  2. Wrench into place.
  3. Turn on the pipe, if necessary.

How to Remove a Pipe

  1. Perform the step you used to set the pipe into place in reverse (make sure the pipe is powered off).
  2. Brace for any junk that might blast out of the pipe.
Источник — https://tg.ss220.club/index.php?title=Руководство_по_строительству&oldid=9998