Руководство по строительству

Also see: Basic construction

Construction

Advanced Materials

Rods

Requires
1 x

 Use metal and click "2x metal rods" (makes two sets of rods)

Floor tiles

Requires
1 x

 Use metal and click "4x floor tiles" (makes 4 floor tiles)

Reinforced Glass

Requires
1 x , 1 x

 Use rods on glass

Reinforced Metal

Smelted with a combination of iron ore and plasma ore at the Mining furnace.

Floor

Lattice

Requires
1 x

The basic base for all types of construction, this is placed directly in space.
Place by having rods in your hand, and clicking on a empty space tile.

Plating

Requires
1 x

The basic floor which you put things like wires and pipes upon, 'all' floor is built ontop of this.
Place by having the floor tile in your hand, and click on a lattice.

Steel Floor

Requires
1 x

This is the basic "nice" floor, this floor should be considered used in all public areas, hence why 
there's none of these in maintence.
 Place by having the floor tile in your hand, and click on a Plating tile.  

Light Floor

Requires
1 x , 1 x , 5 x

 Assuming there already is a plating
 Use the wire on glass
 Use the metal on the tile you get
 Place the light tile on the plating

Walls

Requires
4 x

 Click the metal in your hand to open the construction panel,
 Choose 'Build wall girders' from the list
 Use the remaining 2 sheets of metal on the girders

Reinforced walls

Requires
2 x , 2 x

 Click the metal in your hand to open the construction panel,
 Choose 'Build wall girders' form the list
 Use the reinforced metal on the girders to reinforce them
 Use the last reinforced metal sheet on the reinforced girders to finish the wall

Grille

Requires
2 x

 Stand where you wish the grille to be placed
 Click on the stack of 2 rods with the hand you have them in

Windows

One Directional

Requires
1 x ,

 Click the glass pane
 Click the "one direct" button
 Right-click the new pane and rotate it
 Use the screwdriver to fasten it down

 Alternatively:
 Use the glass on a grille.
 Right-click the new pane and rotate it
 Use the screwdriver to fasten it down

Full

Requires
2 x ,

 Click the glass pane
 Click the "full" button
 Use the screwdriver to fasten it down

Reinforced Window

One Directional

Requires
1 x , ,

 Click the reinforced glass pane
 Click the "one direct" button
 Right-click the new pane and rotate it
 Screwdriver (Secure frame to floor.)
 Crowbar (Pop pane in.)
 Screwdriver (Secure pane.)

 Alternatively:
 Use the reinforced glass on a grille.
 Right-click the new pane and rotate it
 Screwdriver (Secure frame to floor.)
 Crowbar (Pop pane in.)
 Screwdriver (Secure pane.)

Full

Requires
2 x , ,

 Click the reinforced glass pane
 Click the "full" button
 Screwdriver
 Crowbar
 Screwdriver 

Файл:Windoor.png Window-door (Windoor)

Requires
5 x , 2x , 1x , , , , 1x

 Click the reinforced glass pane
 Click the "Windoor" button
 Wrench
 Plasteel (Optional: To create a secure windoor)
 Cable
 Airlock Electronics
 Crowbar

Hidden Door

Regular

Requires
4 x ,

 Click the metal in your hand to open the construction panel,
 Choose 'Build wall girders' form the list
 Use crowbar on girders and wait a few seconds for the girders to dislodge.
 Use the remaining 2 sheets of metal on the girders

To turn a wall into a hidden door, follow the deconstruction guide for the wall type until the final wrenching, and instead proceed from the "Use crowbar on girders" line above.

Reinforced

Requires
2 x ,2 x ,

 Click the metal in your hand to open the construction panel,
 Choose 'Build wall girders' form the list
 Use crowbar on girders and wait a few seconds for the girders to dislodge.
 Use the reinforced metal on the dislodged girders twice to finish it

Wall Mountings

Файл:APC.png APC

Requires
2 x , 1x , 1x Power Control Module, , 1x , ,

 Use the metal and make an APC frame 
 Use the frame on the wall you want the APC on.
 Fit it with the wire coil.
 Fit it with the Power Control Module.
 Screwdriver the electronics into place.
 Add the Power Cell.
 Crowbar shut. It starts ID locked, with the cover engaged and the main switch turned off.

APCs may only be placed in areas which have been defined as a Station Area using the Chief Engineer's Station Blueprints. If you're trying to replace a broken APC, you can get the cover off by breaking it, likely with a fire extinguisher.

Air Alarm

Requires
2 x , 1x , 1x Air Alarm Electronics,

 Use the metal and make an air alarm frame.
 Use the frame on the wall you want it on.
 Put in the electronics.
 Wire it with 5 cable pieces.
 Screwdriver to close.

Fire Alarm

Requires
2 x , 1x , 1x Fire Alarm Electronics,

 Use the metal and make an air alarm frame.
 Use the frame on the wall you want it on.
 Put in the electronics.
 Wire it with 5 cable pieces.
 Screwdriver to close.

Airlock

Requires
4 x , 1x , , , 1x ,
Optional
1x ,

	Use the metal and make an Airlock Assembly
	Wrench it in place
	Use pen to name the Airlock (OPTIONAL)
	Add reinforced glass to make a glass airlock (OPTIONAL)
	Add wires
	Unlock the airlock electronic board with an ID
	Use the airlock electronic board and set the access level
	Add the airlock electronic board to the airlock frame.
	Screwdriver to finish

Файл:Computer Solar.png Computers

Requires
5 x , 2x , 1x (5 pieces), , , 1x

 Use the metal to open the construction panel
 Choose Computer frame
 Wrench it inplace
 Insert Circuitboard
 Screwdriver
 Wires
 glass
 Screwdriver to finish

AI Core

Requires
4 x , 2x , 1x , , , 1x , optional:

 Build Frame from 4 reinforced sheets 
 Wrench into place 
 Add Circuit board 
 Screwdriver 
 Add wires 
 Add brain placed in an MMI (only if you want a NEW AI) 
 Add reinforced glass
 Screwdriver

Machine

Their construction detailed in the machine construction guide.

Файл:Lightfixture.png Light Fixture

Requires
2 x , 1x , light tube/bulb,

 Build frame from 2 metal sheets (or 1 metal sheet for small lights)
 Place frame on wall
 Add wires
 Screwdriver
 Add light tube (or light bulb for small fixtures)

Security Camera

Requires
1 x Camera Assembly, 1x , , ,

 Place the camera assembly on the tile where'd you like the camera to be.
 Wrench it into position
 Weld it to the wall.
 Add any additional upgrades. (OPTIONAL)
 Add wire.
 Screwdriver the camera to complete it.
 Set camera network (default is SS13)
 Set camera direction

For upgrades, insert solid plasma for EMP proofing, a carrot for X-Ray and a proximity sensor for Motion.

Turrets

requires
7 x , , , , 1 x any energy-based gun , 1 x proximity sensor

 Build a turret frame from metal
 Use a wrench to secure the turret frame(it can be moved around before being secured)
 Use metal on the turret frame to build the cover
 Use a wrench on the frame to bolt the cover
 Add the gun
 Add the prox sensor
 Use a screwdriver to secure it all
 Use more metal on the frame
 Finally use a welder to secure the second layer of metal

Robots, cyborgs and mechs

Their construction is described: robots, cyborgs and mechs.

Disposal Pipes and Machinery

Requires
1 x Disposal Pipe/Machine, , ,

 Retrieve the pipe/machine from the Disposal Pipe Dispenser (found in Atmosia)
 Crowbar floortile if exists to access plating
 Move pipe over plating, rotate and flip using the rightclick menu
 Wrench pipe
 Weld pipe

Solar Panels and Trackers

Requires
, , or , (OPTIONAL)

 Place the solar assembly on where you want to construct your solar panel/tracker. To connect it to a wire you must construct it under a wire node.
 Wrench the solar assembly into place.
 Add the electronics if you want to create a solar tracker (OPTIONAL)
 Finish the construction by placing glass, or reinforced glass, into the assembly frame.

Bookcase

Requires
5 x , ,

 Construct a frame with 4 wooden planks.
 Wrench the frame into place.
 Add a plank to the frame to make a shelf.

Deconstruction

Floors

Requires
, For light floors:

 For all floors, use a crowbar on a floor tile to remove it
 
 If you're working on a light floor, you can further dismantle the light floor tile:
   Use a crowbar on the light tile to remove the metal
   Use wirecutters on the resulting tile to separate wires from glass

Walls

Requires
, (Or )

 Weld off the plating
 Wrench the girders apart
 (Alternately, you can use a Crowbar to dislodge the girders and drag them out of the way)

Reinforced walls

Requires
, , , ,

 Wirecutters.
 Screwdriver.
 Welder.
 Crowbar.
 Wrench.
 Welder.
 Crowbar.
 Screwdriver.
 Wirecutters.
 Wrench.

Grille

Requires
or

 Use wirecutters twice to destroy the grille OR
 Use screwdriver to unfasten it

First method destroys it, giving two sets of metal rods. Wirecutters will remove it instantly, attacking the grill will instead kick it, requiring a good few kicks. Second loosens the grille, allowing it to be pulled around. Destroying the grill in this method will leave behind a still-secured section of broken grill which may be walked over but is not aesthetically pleasing. Wirecutters will not instantly remove this remnant. However, using a lit welder will destroy it instantly.

Windows

Requires
,

 Screwdriver to unscrew the window from the floor.
 Wrench to deconstruct the window.

Hitting the pane repeatedly with a blunt item will smash it into a glass shard.

Reinforced Windows

Requires
, ,

 Screwdriver to unsecure the glass from the frame.
 Crowbar to pop the glass out.
 Screwdriver to unscrew the frame from the floor.
 Wrench to deconstruct the window.

Hitting the pane repeatedly with a blunt item will smash it into one set of metal rods and a glass shard.

Hidden Door (Regular or Reinforced)

Requires
,,

 Screwdriver
 Welder
 Wrench

Table

Requires

 Wrench to disassemble the table.

Reinforced Table

Requires
,

 Welder to weaken the table.
 Wrench to disassemble it.

Wall Mountings

APC

Requires
, , , ,

 Swipe Card to unlock APC. Alternatively, if the APC is broken (tilted and cracked cover), try using a fire extinguisher to smash off the cover, allowing access to the battery.
 Remove Power Cell.
 Screwdriver to unsecure electronics.
 Crowbar to lift floor tile in front of APC
 Wirecutters to remove cables.
 Crowbar to remove Power Control Board.
 Welder to remover from wall.
 Wrenching the frame that is now detached from the wall de-constructs it to two metal sheets.
 

Air Alarm

Requires
, , ,

Open cover with screwdriver.
Cut all the wires using wirecutters.
Cut the remaining wires by clicking on the airalarm with wirecutters.
Pry out the circuit using the crowbar.
Remove the frame from the wall using the wrench.

Fire Alarm

Requires
, , ,

Open cover with screwdriver.
Cut the wires by clicking on the firealarm with wirecutters.
Pry out the circuit using the crowbar.
Remove the frame from the wall using the wrench.

Airlock

Requires
, , , , ,

 Screwdriver the door.
 Use multitool and wirecutters to disable everything except the doorbolts as detailed here. Doorbolts must be up for this to work.
 Weld the door shut.
 Crowbar the electronics out. (if the door is electrified, this won't work for some reason)
 Wirecut the wires out.
 Unsecure it with a wrench.
 Weld it to deconstruct to metal plates.

Cannot be done to an emagged airlock. RCD deconstruction must be used for that. It is possible to build a new airlock over the emagged one.

Computers

Requires
, , , ,

 Screwdriver to detach the screen.
 Crowbar to pry off the screen.
 Wirecutters to cut the cables.
 Screwdriver to detach the circuit lid.
 Crowbar to pry out the circuit.
 Wrench to detach the frame.
 Welder to disassemble the frame.

Returns all components used in construction.

Machine

Requires
, , ,

 Screwdriver to open the cover.
 Crowbar to pry out the circuit.
 Wirecutters to remove the wires.
 Wrench to disassemble the frame.

Usually returns all or most components used in construction. Some components may become broken.

Recharge Station

Requires
, , , ,

 Unlock the charger with an ID
 Screwdriver to open the cover.
 Wrench to dislodge the internal plating.
 Wirecutters to remove the wires.
 Crowbar to remove the components.

Usually returns all or most components used in construction. Some components may become broken.

Security Camera

Requires

	Screwdriver the camera to open the back panel.
	Use your wirecutter to cut all the wires. (Cutting the alarm wire is optional)
	Use your welder to unweld the camera from the wall.
	Wrench the camera to unattach it from the wall.
	Crowbar the camera assembly to remove any upgrades.

Disposal Pipes

Requires
,

 Welder on pipe to remove its joints
 Wrench to detach it from the plating

Note: You can then click and drag the pipe segment onto the disposal pipe dispenser to delete it

Disposal Machinery

Requires
, ,

 If Disposal Bin, turn off the pump
 Screwdriver to remove power connection
 Welder on machine to remove its joints
 Wrench to detach it from the plating

Solar Panels and Trackers

Requires
,

 Take out the panel with a crowbar.
 If you are deconstructing a tracker, you can take out the electronics with your crowbar (OPTIONAL)
 Unwrench the leftover assembly from it's place and you will be able to move it.

Bookcase

Requires
, ,

 Crowbar out the shelf.
 Unsecure the frame with a wrench.
 Break apart the frame with a crowbar.

Locker

Requires

 Open the locker.
 Weld the locker.